Översikt över kategorier och produkter hos www.raidopower.se

RAIDOPOWER.SE - Generalagent för Ksport Racing Coilovers, Bromskit samt Mishimoto Racingkylare. Walbro bränslepumpar och spridare från Bosch, Delphi, Lucas och Siemens Deka. Stort sortiment av Blixtljus, varningsljus, blåljus.. RAIDOPOWER.SE - Coilovers Bromskit Spridare Walbro Blixtljus

Blixtljus, varningsljus, led, blåljus, bromsar, ksport, spridare, bränslespridare, walbropump, walbropumpar, bc racing, walbro, coilovers, stötdämpare, drifting, coilover, toyota, 200sx, 300zx, 350z, 3000gt, evo, evolution, mitsubishi, sweden, car, cars, speedshop, speed, jdm, skyline, nissan, s14, s14, s14a, mazda, toyota, rx8, rx7, calibra, bil, bilar, miata, r34, r33, r32, gtr, racing, drifting, ksport, k-sport, bromsar, bromskit, bremser, senkesett, RAIDOPOWER.SE - Coilovers Bromskit Spridare Walbro Blixtljus

• 7" TFT LCD Solskyddsskärm (rp70av)
  Fjärrkontroll
  <font face="Arial7 inch Sun Visor TFT LCD Monitor PAL/NTSC system With Remote Controller OSD menu Image can be changed left to right Two Video inputs Dimension:37.5X14.5X2.3cm Weight:0.74Kg</font
  
  
• Delphi 998cc Spridare 17113744 17104989 (17113744)
  Delphi 998cc 17113744 Spridare - Låg
  face=ArialDelphi 998cc 17113744 Spridare (1000cc) face=ArialDenna Delphi spridare flödar 998cc vid 3 bars bränsletryck.&nbsp;Den har 6 hålsteknik och&nbsp;är&nbsp;lågohmig 2.0 ohm "peak n hold". Det är en "bosch standard" modell dvs den passar i dom flesta amerikanska och europeiska bilar. face=ArialLagervara, omgående leverans. face=ArialDelphi Part Number 17113744 (OE # 17104989) -1Static Flow Rate @ 43.5PSI (300 KPa) = 95.0 lb/hr / 12.0 gm/sec / 998 cc/min -1Dynamic Flow Rate @ 43.5PSI (300 KPa)&nbsp; 2.5ms pulse width and 10ms repetition rate =...
  
  
• Delphi 893cc Spridare 17113743 25324745 (17113743)
  Delphi 893cc 17113743 Spridare - Låg
  face=ArialDelphi 893cc 17113743 Spridare face=ArialDenna Delphi spridare flödar 893cc vid 3 bars bränsletryck.&nbsp;Den har 6 hålsteknik och&nbsp;är&nbsp;lågohmig 2.0 ohm "peak n hold". Det är en "bosch standard" modell dvs den passar i dom flesta amerikanska och europeiska bilar. face=ArialLagervara, omgående leverans. face=ArialDelphi Part # 17113743 (OE # 25324745) -1Static Flow Rate&nbsp; @ 43.5 PSI (300kPa) (Test Solvent):&nbsp; 85.0 lb/hr = 10.7gm/sec = 937cc/min -1Dynamic Flow Rate&nbsp; @ 43.5 PSI (300kPa) 2.5ms pulse width and 10ms...
  
  
• Delphi 788cc Spridare 17113742 17104988 (17113742)
  Delphi 788cc 17113742 Spridare - Låg
  face=ArialDelphi 788cc 17113742 Spridare face=ArialDenna Deplhi spridare flödar 788cc vid 3 bars bränsletryck.&nbsp;Den har 6 hålsteknik och&nbsp;är&nbsp;lågohmig 2.0 ohm "peak n hold". Det är en "bosch standard" modell dvs den passar i dom flesta amerikanska och europeiska bilar. face=ArialLagervara, omgående leverans. face=ArialDelphi Part Number 17113742 (OE # 17104988) -1Static Flow Rate @ 43.5 PSI (300KPa) =&nbsp; 75.0 lb/hr / 9.5 gm/sec / 788 cc/min -1Static Flow Rate @ 58.0 PSI (400KPa) =&nbsp; 86.6 lb/hr / 11.0 gm/sec / 909 cc/min -1Dy...
  
  
• Delphi 683cc Spridare 17113814 25324367 (718cc) (17113814)
  Delphi 683cc 17113814 Spridare - Låg
  face=ArialDelphi 683cc 17113814 Spridare face=ArialDenna Deplhi spridare flödar 683cc vid 3 bars bränsletryck.&nbsp;Den har 6 hålsteknik och&nbsp;är&nbsp;lågohmig 2.0 ohm "peak n hold". Det är en "bosch standard" modell dvs den passar i dom flesta amerikanska och europeiska bilar. face=ArialLagervara, omgående leverans. face=ArialDelphi Part Number 17113814 (OE #25324367) -1Static Flow Rate @ 43.5PSI (300kPa) = 65.0 lb/hr&nbsp; /&nbsp; 8.2 g/sec / 718 cc/min (683cc) -1Dynamic Flow Rate @ 43.5PSI&nbsp; 2.5ms pulse width and 10ms repetition ra...
  
  
• Delphi 525cc Spridare 17113738 17104487 (17113738)
  Delphi 525cc 17113738 Spridare - Hög
  face=ArialDelphi 525cc 17113738 17104487 Spridare face=ArialDenna Deplhi spridare flödar 525cc vid 3 bars bränsletryck.&nbsp;Den har 6 hålsteknik och&nbsp;är&nbsp;högohmig 12.0 ohm "Saturated". Det är en "bosch standard" modell dvs den passar i dom flesta amerikanska och europeiska bilar. face=ArialLagervara, omgående leverans. face=Arial Part Number 17113738 (OE # 17104487) -1Static Flow Rate: 50.0 lb/hr @ 43.5PSI (300kPa) 525cc/min or 6.4gm/sec -1Static Flow Rate: 57.7 lb/hr @ 58.0PSI (400kPa) 606cc/min or 7.4gm/sec -1Dynamic Flow Rate 2.5ms pulse w...
  
  
• 3 bar mapsensor (3bar)
  3bar mapsensor - GM ref 12223861
  3 bar mapsensor Kontaktstycke ingår (se bild) Finns&nbsp;i lager för omgående leverans face=ArialMAP Sensor, Bosch-Style, 3-Bar, Stock-Style, referensnummer GM 12223861 The pressure inside your intake manifold is extremely important input to the ECU. A quality MAP sensor like MSD’s is crucial to your engines performance. These sensors will respond to changes in manifold pressures and relay the information to the ECU in the form of a voltage signal ranging from about 1 to 5 volts. 0 0 1 "98%" center vAlign=top 200 face=ArialMAP Sensor Range (bar) 300 face=Arial3...
  
  
• Kontakt till 3 bars mapsensor (cn3bar)
  Kontakt till 3bars mapsensor
  Kontakt till 3 bar mapsensor OBS! Denna kontakt ingår vid köp av mapsensor från oss. Finns&nbsp;i lager för omgående&nbsp;leverans!
  
  
• Siemens Deka 599cc Spridare 3102 FI11402 (3102)
  Siemens Deka 599cc 3102 Spridare - Låg
  face=ArialSiemens Deka 599cc 3102 Spridare face=ArialDenna&nbsp;Siemens Deka&nbsp;spridare flödar 599cc vid 3 bars bränsletryck.&nbsp;Den har Disc sprut teknik och&nbsp;är&nbsp;lågohmig 2.35 ohm "peak n hold". Det är en "bosch standard" modell dvs den passar i dom flesta amerikanska och europeiska bilar. face=ArialLagervara, omgående leverans. face=ArialSiemens Part # FI11402 (old P/N 3102) (Commonly known as Siemens 55´s) -1All tests run with n-Heptane (0.6855g/mL) @ 20<SUPo</SUPC (+/-1<SUPo</SUPC), 3.0 Bar (+/-0.01 Bar) (43.5PSI) ,...
  
  
• Siemens Deka 788cc Spridare 3145 FI11445 (3145)
  Siemens Deka 788cc 3145 Spridare - Låg
  face=ArialSiemens Deka 788cc 3145 FI11445 Spridare face=ArialDenna&nbsp;Siemens Deka&nbsp;spridare flödar 788cc vid 3 bars bränsletryck.&nbsp;Den har Disc sprut teknik och&nbsp;är&nbsp;låg ohmig 2.35 ohm "peak n hold". Det är en "bosch standard" modell dvs den passar i de flesta amerikanska och europeiska bilar. face=ArialLagervara, omgående leverans. face=ArialSiemens Part # FI11445 (old P/N 3145) (Commonly known as Siemens 72´s) -1All tests run with n-Heptane (0.6855g/mL) @ 20<SUPo</SUPC (+/-1<SUPo</SUPC), 3.0 Bar (+/-0.01 Bar) (43...
  
  
• Siemens Deka 903cc Spridare FI11405 3105 (3105)
  Siemens Deka 903cc 3105 Spridare - Låg
  face=ArialSiemens Deka 903cc FI11405 3105 Spridare face=ArialDenna&nbsp;Siemens Deka&nbsp;spridare flödar 903cc vid 3 bars bränsletryck.&nbsp;Den har Disc sprut teknik och&nbsp;är&nbsp;lågohmig 2.35 ohm "peak n hold". Det är en "bosch standard" modell dvs den passar i dom flesta amerikanska och europeiska bilar. face=ArialLagervara, omgående leverans. face=ArialSiemens Part # FI11405 (old P/N 3105) (Commonly known as Siemens 83´s) -1All tests run with n-Heptane (0.6855g/mL) @ 20<SUPo</SUPC (+/-1<SUPo</SUPC), 3.0 Bar (+/-0.01 Bar) (43...
  
  
• Lucas 444cc Spridare 01D030B 621031 (01D030B)
  Lucas 444cc 01D030B Spridare - Hög
  face=ArialLucas 444cc 01D030B 621031 D3181AA Spridare face=ArialDenna&nbsp;Lucas spridare flödar 444cc vid 3 bars bränsletryck.&nbsp;Den har 6 hålsteknik och&nbsp;är&nbsp;högohmig 15.9 ohm "Saturated". Det är en "bosch standard" modell dvs den passar i dom flesta amerikanska och europeiska bilar. face=ArialLagervara, omgående leverans. face=ArialPart Number 01D030B (Lucas old 5208<U009</U, Lucas New 621031, Delphi old D3181AA) -1All tests run with n-Heptane @ 20<SUPo</SUPC (+/-1<SUPo</SUPC), 3.0 Bar (+/-0.01 Bar), 14VDC (+/-0.05VDC...
  
  
• Lucas 389cc Spridare D3165BA 621037 (D5162AA)
  Lucas 389cc 621037 Spridare - Hög
  face=ArialLucas 389cc 621037 D3165BA Spridare face=ArialDenna&nbsp;Lucas spridare flödar 389cc vid 3 bars bränsletryck.&nbsp;Den har 6 hålsteknik och&nbsp;är&nbsp;högohmig 15.9 ohm "Saturated". Det är en "bosch standard" modell dvs den passar i dom flesta amerikanska och europeiska bilar. face=ArialLagervara, omgående leverans. -1face=ArialPart Number: D3165BA (Lucas old 5203002, Lucas New 621037) -1All tests run with n-Heptane @ 20<SUPo</SUPC (+/-1<SUPo</SUPC), 3.0 Bar (+/-0.01 Bar), 14VDC (+/-0.05VDC), saturated driver wtih RC cutoff ...
  
  
• Lucas 332cc Spridare 621020 (621020)
  Lucas 332cc 621020 Spridare - Hög
  face=ArialLucas 332cc 621020 Spridare face=ArialDenna&nbsp;Lucas spridare flödar 332cc vid 3 bars bränsletryck.&nbsp;Den har 6 hålsteknik och&nbsp;är&nbsp;högohmig 15.9 ohm "Saturated". Det är en "bosch standard" modell dvs den passar i dom flesta amerikanska och europeiska bilar. face=ArialLagervara, omgående leverans. face=ArialPart Number D1720xx (Lucas old 5207009, Delphi / Lucas New 621020) -1All tests run with n-Heptane @ 20<SUPo</SUPC (+/-1<SUPo</SUPC), 3.0 Bar (+/-0.01 Bar), 14VDC (+/-0.05VDC), saturated driver with RC cutoff ...
  
  
• DVD/MP3/CD-spelare (rpdvd004)
  Klarar DVD/MP3/CD/VCD/CD-R/CD-RW - RDS Radio - Dolby AC-3 & DTS - 45x4w - 5.1 utgång - Fjärr
  KNOCK-DOWN PANE L RDS FUNCTION COMPATIBLE WITH DVD,MP3 CD,VCD2.0,CDI,CD,DVCD,CD-RW DOLBY AC-3 &amp; DTS SYSTEM BUILT IN BUILT IN 45WX4 POWER AMPLIFIER BUILT IN DIGITAL AM/FM TUNER ELECTRONIC VOLUME CONTROL SYSTEM 5.1 CHANNEL OUTPUT POWERFUL ELECTRONIC AND MECHANICAL ANTISHOCK SYSTEM CDC IN &amp; AUX IN (LINE IN OUT) LCD COLORFUL DISPLAY DIGITAL KEY CONTROL REMOTE CONTROL TIME SEARCH AND RESUME
  
  
• TV Antenn (rpant01)
  TV Antenn - Till alla bildskärmar med inbyggd TV-mottagre - Förstärker TV-signalen
  * Single Window-mounted Booster Antenna * Single Channel Input (Mini-plug) 20dB.Gain * Receives Signals On Channels 2-13 & 14-69 * Cable Length 5 metres * Output Impedance: 75 Ohms
  
  
• TV Antenn (rpant02)
  TV Antenn - Passar alla bildskärmar med inbyggd TV-mottagare - Förstärker TV-signalen
  Reception Channels: FM(60mhz-100mhz) VHF(1CH-12CH) Supply voltage: DC12V(10.8-15.8V)minus earthing Power supply fuse(1.5A) Booster gain 5-9db(VHF Band), 4-8 db(UHF Band) Connection outlet, antenna plug: dia 3.5mm(75ohm) Length of the cord: 4.8 M
  
  
• TV Mottagare (rptvm02)
  TV Mottagare för bildskärmar utan inbyggd TV-mottagare
  Product name: CAR TV TUNER BOXConsumption: 3WPower: DC 10-14VFunction:·Four line antenna input·CCD camera/AV input·Audio/Video output·Mini Remote controller with power indictor.·TV Audio FM emissive 88.00—89.5MHZ·Remote controller·PAL-DKI/BG?NTSC-N/M selectable·Sound transmitting with FM modulator (PLL provided)·Calendar·Chinese/English option positiveExternal dimensions: 160(W) × 103(H) × 27.5(D) (mm)Weight: around 450g
  
  
• Siemens Deka Mototron 630cc Spridare 107961 FI114961 (L107FM)
  Siemens Deka 630cc FI114961 Spridare - Hög
  face=ArialSiemens Deka Mototron 630cc FI114961 107961 Spridare face=ArialDenna&nbsp;Siemens Deka Mototron&nbsp;spridare flödar 630cc vid 3 bars bränsletryck.&nbsp;Den har&nbsp;4 hålsteknik och&nbsp;är&nbsp;högohmig "Saturated". Det är en "bosch standard" modell dvs den passar i dom flesta amerikanska och europeiska bilar. face=ArialLagervara, omgående leverans. face=ArialPart # L107FM&nbsp; (Siemens FI114961 - Mototron INJ-GAS-006 - Accel 74620L - MSD/Edge&nbsp; 2030 - 107961) -1All tests run with n-Heptane (0.6855g/mL) @ 20oC (+/-1o...
  
  
• Bosch 1680cc Spridare 0280150842 (02801508xx)
  Bosch 1680cc 0280150842 Spridare - Låg
  face=ArialBosch 1680cc 0280150842 Spridare face=ArialGenuine Bosch 0280150842 1680 cc/min ( 160 lb/hr ) Blue Top Indy Low Impedance Injectors ( Alcohol Compatible ) face=ArialBosch har i dagsläget slutat tillverka dessa - passa på! These injectors flow 1600 cc/min at 43.5 PSI ( 3 BAR ) and are fully compatible with alternate fuels and alcohol! Some websites may refer to their flow rating as 160 lb/hr or 150 lb/hr or 1680 cc/min Bosch Low Impedance Injectors. Frequently used in racing, flex fuel applications and alternate fuel applications, these low impedance injectors combine extremel...
  
  
• HKS Super Sequential BOV (SSQV) (hksssqv)
  HKS Super Sequential Dumpventil (SSQV)
  HKS&nbsp;SSQV är&nbsp;specialutvecklad och medför att den aldrig läcker tack vare att den är utrustad med dubbel vaccum ventil.&nbsp;Den har en liten ventil(för låga tryck) och en större för höga tryck och flöde. Tillverkad av aluminium. Monteras med hjälp av en fläns(finns i stål eller aluminium) som svetsas direkt på tryckröret och O-ring o ett clips säkerställer att det verkligen håller tätt och på sin plats.&nbsp;HKS SSQV fungerar perfekt till alla typer av insprutningssystem.
  
  
• Intercooler (ic450)
  780x450x76 - 3" In/Ut
  Bredd: 780mm Höjd: 450mm Tjocklek: 76mm In/ut: 3 tum TIG-svetsad 6061 Aluminium Polerade ändar Max rekommenderat tryck 50 PSI Lågt tryckfall med endast 0,2 PSI vid 15 PSI 1020 CFM Fyra inbyggda universalfästen (2 övre, 2 undre)
  
  
• Hks Insugskamaxel 22002-AM007 (hksev6ikx)
  Hks Insugskamaxel 22002-AM007
  Hks Insugskamaxel 22002-AM007 Motor 4G63BT Duration:&nbsp;280 Lyft: 10.2
  
  
• Hks avgaskamaxel 22002-AM008 (hksev6akx)
  Hks avgaskamaxel 22002-AM008
  Hks avgaskamaxel 22002-AM008 Motor 4G63BT Duration:&nbsp;280 Lyft: 10.2
  
  
• Walbro GSS341 255lph Dränkpump Bensinpump (intank) GSS 341 (GSS341)
  Walbro GSS341 - Högtryckspump
  WALBRO GSS341 Walbro face=ArialGSS341&nbsp;&nbsp;GSS 341 högtryckspump / bensinpump&nbsp;som monteras i tanken. Ett universal kontaktstycke samt filter medföljer för enkel installation. Walbropumpen klarar av att pumpa 255 liter/timme,&nbsp;räcker till&nbsp;ca 500-550hk/st (bensin) och&nbsp;ca 400-450hk/st (E85). Se de 2st mindre bilderna under den stora bilden för att se hur anlsutningarna sitter på denna modell, samt flödesschema. Deta enda som skiljer mot GSS342 är hur anslutningarna sitter på pumpen. Diameter 39 mm / Vikt 365 gram Walbro bensinpumpar ...
  
  
• Walbro GSL392 255lph Bensinpump Högtryck (InLine) GSL 392 (gsl392AN6x2)
  Walbro GSL392 - Högtryckspump
  face=ARIAL WALBRO GSL392 Walbro GSL392 GSL 392 högtryckspump / bensinpump som ska monteras utanför tanken. Medföljer ett universal monteringskit, se bild. Walbropumpen flödar 255lph, klarar av upp till&nbsp;drygt 500-550hk/st (bensin) och&nbsp;ca 400-450hk/st (E85). Se de 2 mindre bilderna under den stora bilden för flödesschema och specifikation. 8 mm slanganslutning / Diameter 39 mm / Vikt ca 365g Walbro bensinpumpar finns alltid i lager för omgående leverans! &nbsp;
  
  
• HKS GT II 50mm Wastegate (Rphkswg50)
  HKS GT II 50mm Wastegate
  The HKS GT II Wastegates are the latest in wastegate technology. They feature a lower body cast from stainless steel and an anodized purple upper case machined from billet aluminum. The GT II Wastegates weighs approximately 2/3’s the weight of the original GT Wastegate and are significantly smaller in height and width. Their compact size combined with the GT II’s V-band inlet and outlet flanges allows for versatile mounting in tight spaces.
  
  
• HKS GT II 60mm Wastegate (Rphkswg60)
  HKS GT II 60mm Wastegate
  The HKS GT II Wastegates are the latest in wastegate technology. They feature a lower body cast from stainless steel and an anodized purple upper case machined from billet aluminum. The GT II Wastegates weighs approximately 2/3’s the weight of the original GT Wastegate and are significantly smaller in height and width. Their compact size combined with the GT II’s V-band inlet and outlet flanges allows for versatile mounting in tight spaces.
  
  
• HKS Racing SS Wastegate 50mm (rphksss50)
  HKS Racing SS Wastegate 50mm
  HKS Stainless Steel Racing Wastegate are race proven external units constructed with die-cast mounting base structures and valve seats, fully sealed shafts, high temperature resistant diaphragms &amp; utilize 50mm valves to support up to 1000 horsepower turbo applications. The Racing Wastegate S/S units utilize a squared shaped stainless steel inlet flange.
  
  
• Hks Standard 40mm Wastegate (rphksstwg40)
  Hks Standard 40mm Wastegate
  The HKS Standard Wastegate is designed for applications producing upwards of 500HP. A machined 40mm stainless steel valve is utilized to regulate boost pressure. HKS Standard Wastegates are available in five different base boost levels ranging from 0.4kg/cm2 (5.7PSI) - 1.4kg/cm2 (20PSI).
  
  
• GReddy Type-S Wastegate 34mm (rpgrwg34)
  GReddy Type-S Wastegate 34mm
  "style3 style4face=Arial One of the most important components in a well designed turbocharged engine is a properly sized wastegate. Too small of a wastegate can cause boost creep while too large of a wastegate will increase boost lag and decrease performance. Our GReddy external wastegates are made from the highest quality materials to insure both stability and durability in a turbocharger´s boost control.
  
  
• GReddy Type-R Wastegate 47mm (rpgrwg47)
  GReddy Type-R Wastegate 47mm
  "style3 style4face=Arial One of the most important components in a well designed turbocharged engine is a properly sized wastegate. Too small of a wastegate can cause boost creep while too large of a wastegate will increase boost lag and decrease performance. Our GReddy external wastegates are made from the highest quality materials to insure both stability and durability in a turbocharger´s boost control.
  
  
• GReddy Type-CH Wastegate 56mm (rpgrwg56)
  GReddy Type-CH Wastegate 56mm
  "style3 style4face=Arial One of the most important components in a well designed turbocharged engine is a properly sized wastegate. Too small of a wastegate can cause boost creep while too large of a wastegate will increase boost lag and decrease performance. Our GReddy external wastegates are made from the highest quality materials to insure both stability and durability in a turbocharger´s boost control.
  
  
• Stroker kitt 3,4L (sprastr)
  Stroker kitt 3,4L
  Stroker kitt 3,4L Inkluderar: Vevaxel Vevstakar Kolvar
  
  
• HKS Super Sequential Dumpventil Kitt (SSQV) (mzhksssqv)
  HKS Super Sequential dumpventil kitt till Mazda Rx7 1987-1991 (SSQV)
  HKS&nbsp;SSQV är&nbsp;specialutvecklad och medför att den aldrig läcker tack vare att den är utrustad med dubbel vaccum ventil.&nbsp;Den har en liten ventil(för låga tryck) och en större för höga tryck och flöde. Tillverkad av aluminium. Monteras med hjälp av en fläns(finns i stål eller aluminium) som svetsas direkt på tryckröret och O-ring o ett clips säkerställer att det verkligen håller tätt och på sin plats.&nbsp;HKS SSQV fungerar perfekt till alla typer av insprutningssystem. Innehåller alla nödvändiga&nbsp;flänsar&nbsp;och monterings saker som behöva för en snabb...
  
  
• HKS Super Sequential Dumpventil Kitt (SSQV) (mzhksssqv1)
  HKS Super Sequential dumpventil kitt till Mazda Rx7 1993-1996 (SSQV)
  HKS&nbsp;SSQV är&nbsp;specialutvecklad och medför att den aldrig läcker tack vare att den är utrustad med dubbel vaccum ventil.&nbsp;Den har en liten ventil(för låga tryck) och en större för höga tryck och flöde. Tillverkad av aluminium. Monteras med hjälp av en fläns(finns i stål eller aluminium) som svetsas direkt på tryckröret och O-ring o ett clips säkerställer att det verkligen håller tätt och på sin plats.&nbsp;HKS SSQV fungerar perfekt till alla typer av insprutningssystem. Innehåller alla nödvändiga&nbsp;flänsar&nbsp;och monterings saker som behöva för en snabb...
  
  
• Hks Hi-Power ljuddämpare (rpkshpm)
  Hks Hi-Power ljuddämpare ( 60mm in och 96mm ut )
  Denna universal Hks Hi-Power ljuddämparen är av samma kvalitet och modell som följer med alla hela avgassystem som Hks har till olika bilmärken. Mätt: Omkrets: 130mm Ingång: 60mm Utgång: 96mm
  
  
• Hks Hi-Power ljuddämpare (Rphkshpm1)
  Hks Hi-Power ljuddämpare ( 75mm in och 120mm ut )
  Denna universal Hks Hi-Power ljuddämparen är av samma kvalitet och modell som följer med alla hela avgassystem som Hks har till olika bilmärken. Mätt: Omkrets: 170mm Ingång: 75mm Utgång: 120mm
  
  
• Hks Hi Power Carbon Ljuddämpare (Rphkshpmcf1)
  Hks Hi Power Carbon Ljuddämpare ( 60mm in och 96mm ut )
  Denna universal Hks Hi-Power&nbsp;carbon&nbsp;ljuddämparen är av samma kvalitet och modell som följer med alla hela avgassystem som Hks har till olika bilmärken. Mått: Omkrets: 130mm Ingång: 60mm Utgång: 96mm
  
  
• Hks Hi Power Carbon Ljuddämpare (Rphkshpmcf2)
  Hks Hi Power Carbon Ljuddämpare ( 75mm in och 120mm ut )
  Denna universal Hks Hi-Power&nbsp;carbon&nbsp;ljuddämparen är av samma kvalitet och modell som följer med alla hela avgassystem som Hks har till olika bilmärken. Mått: Omkrets: 170mm Ingång: 75mm Utgång: 120mm
  
  
• GReddy Boost Controller Profec B Spec II (RpGRBCPBII)
  GReddy Boost Controller Profec B Spec II
  LCD screen to monitor boost pressure in real time. Readout now in kPa or PSI. (100kPa = 1.01972kg/cm2 = 1.5psi) Controls boost up to 43 psi (This may vary on different turbo systems) There are 2 preset settings that can be selected by a single switch. The response and the consistency of the boost can be adjusted by using the GAIN, START BOOST setting. A built in warning feature will alert the driver when the boost exceeds the set boost pressure with an alarm and a message in the display. When the warning feature is activated, the LIMITER feature can lower the boost to a safe pressure. ...
  
  
• GReddy Boost Controller Profec E-01 (RpGRBCPE01)
  GReddy Boost Controller Profec E-01
  GReddy´s new super multi-tasker is the Profec E-01. Designed as a combination: boost-controller, data display / logger and e-manage programmer, the e-01 can provide superior boost response, increased boost, warning meter functions, 3 channel data-logging, and access to all the programming feautres provided with the latest e-manage support tool. Even when used as just a boost controller the e-01 has fatures to smooth out the boost curve. With both an Auto and Manual setting for both external and actuator style wastegates, the new profec can alter its compact, high capacity solenoid valve via va...
  
  
• HKS Boost Controller EVC V (RPHKBCEVC)
  HKS Boost Controller EVC V
  The new HKS EVC is the 5th generation of the coveted HKS Electronic Valve Controller series of boost controllers. The current evolution of the EVC has made it more compact and user friendly, while offering additional new features and a new contemporary design.
  
  
• GReddy BOV Type-R (RPGRBOVTPR)
  GReddy Type-R Dumpventil 47mm
  Nu kan du Förhindra laddtrycks läckage och kompressorvin med GReddy dump ventil.&nbsp; GReddy type&nbsp;R är komplatibel med nästan alla eftermarkands turbo system och kan annpassas för alla system. Kan användas både som öppen (atmosfärisk och återcirkulerande.&nbsp;Inloppet är 47mm. Type-R Klarar mycket effekt..&nbsp;
  
  
• HKS Fuel Computer GCC (RPHKSFCGCC)
  HKS Fuel Computer GCC
  The GCC is an electronic tuning component designed to add additional flexibility to the fuel tuning capabilities of the VPC, PFC F-CON or F-CON S. The GCC simply plugs into either the VPC or F-CON harness and allows the user to further adjust the air / fuel ratio at five specific rpm points. Each five points offer an adjustment range of 16% rich to 12% lean, in 2% increments, of the base value. Four different selectable rpm ranges allow maximum rpm level flexibility when tuning the fuel curve. The GCC will interpolate, or average between the rpm points of adjustment to ensure a smooth transiti...
  
  
• HKS Turbo Timer Type-1 (RPHKSTTTPE1)
  HKS Turbo Timer Type-1
  This silver turbo timer features regular timer characteristics and many more such as: 1. Vehicle Speed / Speed peak hold display function; 2. Vehicle Speed warning function;3. Engine rpm / rpm peak hold display function;4. Engine rpm warning function, setting able to be made in 2 points (shift up indicator / red line indicator); 5. Distance / Time: Acceleration measurement: 0-100m, 0-200m, 0-400m &amp; Section time: 200-400m&amp; Speed attain time: 0-100km/h, 0-150km/h, 0-200km/h&amp; Acceleration time: 50-100km/h, 100-150km/h &amp; Auto start and manual start function; 6. Stop...
  
  
• MSD Ignition System DIS-2 (RPMSDIGNDIS2)
  DIS-2
  Late model engines with distributorless ignition systems (DIS) can take advantage of MSD performance with the new Digital DIS-2 and DIS-4 Ignition Controls. These capacitive discharge Ignitions feature multi-channel capability complemented with multiple sparks, rev limiters and a timing control. The new DIS Ignitions are engineered with the latest in digital science including power MOSFET technology and efficient IGBT coil drivers. The features of the ignitions are managed by a 15 MHz microcontroller for extremely fast compensations and decisions. In the end this creates incredibly accurate sp...
  
  
• MSD Ignition System DIS-4 (RPMSDIGNDIS4)
  DIS-4
  Four cylinder distributorless ignition applications (with two coil packs) will benefit from the incredible spark energy of the the new MSD Programmable DIS-2 Ignition Control as well as its ignition programming capabilities! MSD"s CD circuits work with state-of-the-art IGBT coil drivers to deliver a spark with 190 mj of spark energy! Below 3,300 rpm, there is series of multiple sparks that burns in the cylinder for 20 producing a smooth idle with great throttle response. You get to control all of this spark energy through an incredible array of timing and rpm programs. The heart of the Pr...
  
  
• MSD Ignition System 6A (RPMSDIGN6A)
  6A
  MSD Ignition Controls are known throughout the world for their performance and reliability. There is an Ignition Control for every application including your daily driver, turbos and blown engines, circle trackers and even 200+ mph Pro Modified Cars.
  
  
• MSD Ignition System 6AL (RPMSDIGN6AL)
  6AL
  MSD Ignition Controls are known throughout the world for their performance and reliability. There is an Ignition Control for every application including your daily driver, turbos and blown engines, circle trackers and even 200+ mph Pro Modified Cars.
  
  
• MSD Tändspole Blaster 2 Hi performance (RPMSDIGNBL2)
  Blaster 2 Hi performance
  If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD Blaster Ignition 6, the Blaster Coil line is the right choice. Improved spark output! Special 100:1 windings are used to provide maximum build-up of voltage! These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. Can be used with stock ignition, Blaster Ignition, MSD 5, 6 or 7 Ignition Control. Most late ...
  
  
• Greddy T67 (mr2gredt67)
  Turbokit
  Vehicles that are already equipped with factory turbochargers have engines with large potential for power that cannot be fully obtained by using the original turbocharger(s). After upgrading the exhaust, intake, blow-off valve and intercooler and adding more fuel and boost, big gains can be found. By also replacing the stock turbocharger with a properly sized GReddy turbo upgrade kit, you can experience new levels of power. Our kits are designed for some of the most popular vehicles. For many, we offer various sizes of turbo kits from mild upgrades to full-on race ready kits with SUS manifol...
  
  
• Greddy T78 (mr2gredt78)
  Turbokit
  Vehicles that are already equipped with factory turbochargers have engines with large potential for power that cannot be fully obtained by using the original turbocharger(s). After upgrading the exhaust, intake, blow-off valve and intercooler and adding more fuel and boost, big gains can be found. By also replacing the stock turbocharger with a properly sized GReddy turbo upgrade kit, you can experience new levels of power. Our kits are designed for some of the most popular vehicles. For many, we offer various sizes of turbo kits from mild upgrades to full-on race ready kits with SUS manifolds...
  
  
• KO-R Street Brawler (kor2mr2trb46)
  Turbokit
  face="Verdana, Helvetica, Arial" The&nbsp;Street Brawler&nbsp;T3/T4 Turbo kit was developed exclusively for the 91-95 Toyota MR2 Turbo, to provide stock (or better) turbo spool, while allowing 300+ rear wheel horsepower to be achieved at 20PSI or less. (with supporting modifications) The kit includes a manifold adapter, which is CNC machined from a solid steel billet and bolts to the stock manifold to retain OEM reliability. The other components include a full 3" mandrel bend down pipe with integrated 1.5" diameter wastegate dump tube, with it´s own flex section, a...
  
  
• Toyota MR2 Vita Blinkers (mr2vitdcblink)
  Vita blinkers inkl orange glödlampor!
  Toyota MR2 1990-1998 SW20, passar både GTi och Turbo. Vita framblinkers, "Diamond Clear", inkl orange glödlampor. Komplett set blinkers, både vänster+höger sida. http://www.raidopower.se//Shop/Image/Article/blinkers.jpeg
  
  
• Toyota MR2 1994-Spec Bakljus (mr294bakljs)
  Toyota MR2 SW20 Komplett kit - Toyota Original
  Till Toyota MR2 1990-1998 SW20, passar både Turbo och GTi. Innehåller: 2 x Backljus 1 x Mittenramp (Svart eller Vit) 2 x Bakljus 2 x Sidoljus Komplett kit, allt som behövs medföljer. Låskolven som sitter på 90-93 bakljusen kan användas, men 94-spec låskolv rekommenderas (medföljer ej), finns på Toyota. http://www.raidopower.se//Shop/Image/Article/mr2bak2.jpeg &nbsp;
  
  
• Toyota MR2 Lexusbakljus (mr2lexusbak)
  Black/Chrome
  Toyota MR2 1990-1998, passar både GTi och Turbo. Kan användas tillsammans med 90-93 mittenpanel, 1994-Spec mittenpanel rekommenderas dock (medföljer ej, köps på Toyota).
  
  
• Toyota MR2 Lexusbakljus (mr2lexusbakc)
  Chrome
  Toyota MR2 1990-1998, passar både GTi och Turbo. Kan användas tillsammans med 90-93 mittenpanel, 1994-Spec mittenpanel rekommenderas dock (medföljer ej, köps på Toyota).
  
  
• Toyota MR2 Lexusbakljus (mr2lexusbakb)
  Black
  Toyota MR2 1990-1998, passar både GTi och Turbo. Kan användas tillsammans med 90-93 mittenpanel, 1994-Spec mittenpanel rekommenderas dock (medföljer ej, köps på Toyota).
  
  
• Toyota MR2 Rev6 Framlampor (mr2rev6fram)
  Komplett kit
  Product_Description Product_DescriptionPassar Toyota MR2 1990-1998, både GTi och Turbo. The Revision6 Low Rise Quad Headlamp Conversion is a complete bolt on replacement kit for the stock Toyota headlamps. It comprises two focused dip beam lamps, two main beam lamps, a complete new headlamp assembly powder coated black to match the stock bracket, new cam and lifting arms and a streamlined plastic shroud, along with all fixings, fittings and electrical connectors. The lamps are "E" marked and suitable for road use in Europe - they can also be user configured for left or right han...
  
  
• Toyota MR2 Rev6 Bakljus (mr2rev6bak)
  Komplett kit
  Product_DescriptionPassar Toyota MR2 1990-1998, både GTi och Turbo. The Revision6 Rear Light Conversion Kit is a direct bolt-on replacement for the existing mk2 MR2 rear lights. They have been designed to fit all revisions of the MR2 with no modifications at all to the vehicle´s bodywork. The kit comprises both left, right and centre panels, along with all the necessary lamps, LED rings, bulbs, fixings, reflectors, wiring looms and instructions to get the job done. Each light unit consists of an inner lamp with a conventional bulb and a chromed outer ring. Four of the six chrome rings s...
  
  
• Toyota MR2 Vita Sidoblinkers (mr2sidob)
  Vita Sidoblinkers Toyota MR2 SW20 1990-1998
  
  
• Toyota MR2 Ersättningslist Sidoblinkers (mr2list)
  Toyota Original
  För de med inbyggd blinkers i listen mellan framhjul och framspoiler, och som vill ersätta den med en heltäckande list. Inkluderar både vänster/höger sida. Olackad (svart) Toyota MR2 SW20 1990-1998
  
  
• 3" Downpipe (mr2medp)
  Toyota MR2 SW20
  SS304 Stainless Steel Construction, Tig welded and polished, Flange for stock O2 sensor, wideband O2 sensor bung, EGT gauge bung and complete gasket and hardware set. 3tum Downpipe Toyota MR2 Celica GT4 3S-GTE I lager för omgående leverans. &nbsp; CT26 / CT20B
  
  
• HKS Intercooler (mr2hksic)
  Kit
  HKS intercooler systems are designed to rapidly &amp; consistently draw heat away from the intake charge by passing it through what is best described as a ´radiator´ for air. This produces power gains throughout the powerband &amp; reduces thermal stress in turbocharged engines. All systems utilize tube and fin intercooler cores, as well as mandrel bent intake pipes, silicone joint hoses &amp; all necessary installation brackets &amp; hardware Mounted at stock location.
  
  
• Spearco Interooler (mr2sparcoic)
  Kit
  * Massive 6" thick Spearco core. * Fully shrouded and ducted for optimum air flow. * 8"" Spal Turbo fan * Boost activated fan switch * Mandrel Bent Intercooler plumbing * All needed plumbing and hardware * Installation Instructions Mounted at stock location.
  
  
• 6,5 Tums "Double Din" Multimedia-Stereo (rp65indmm)
  Inbyggd DVD/CD/MP3-spelare, TV-Tuner, Förstärkare, Fjärrkontroll etc.
  postbody6,5" Dubbel DIN TFT LCD skärm 16:9 Widescreen Anti-glans behandlad yta Inbyggd DVD / MP3 / CD / CD-R / VCD-spelare (regionsfri) 1.440x234 pixlar = 336.000 pixlar Inbyggd TV-tuner, 40 kanaler AM/FM-radio, 24 kanaler Inbyggd förstärkare (4x45w) Fullfunktions fjärrkontroll A/V-ingång/utgång Stöd för backkamera, GPS, Video, TV-spel etc 148mmx178mmx100mm (2x DIN) FCC/CE/E-märkt
  
  
• DVD/CD/MP3-växlare (rpdvdchang)
  10 skivor
  #373737 Type: 10-disc DVD/Video CD/MP3 CD/Audio CD Changer system Region Number: All regions #373737 Playable discs: Type: DVD video, Video CD, MP3 CD, Audio CD Size: 5 inches (12cm) TV signal format: NTSC color/PAL color Pickup:&nbsp;&nbsp;Optical semiconductor laser &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;(DVD: 1-beam, CD: 3-beam) Channels: 2-channel stereo Frequency response: 5Hz-20kHz Dynamic rang: 90dB Signal to noise ratio: 90 dB Total harmonic distortion: 0.01%(1 kHz)) Channels separation: 85dB (1 kHz) Wow and flutter: Below measurable ...
  
  
• 7 Tums Infällbar Multimedia-Stereo (rp7mmind2)
  CD/MP3/DivX/DVD/DTS/TV-tuner
  7" TFT LCD Motordriven bildskärm Inställningsbar betraktarvinkel Stödjer DVD-Video, DVD-Audio, CD, MP3, MP4, VCD etc Inbyggd equaliser C-bus Systemkontroll Dolby Digital Surround (DTS) 1XDIN storlek CCD Kameraingång (backkamera) Inställningar för bild (ljusstyrka, kontrast, färg, dimmer inställning) TV-tuner 50x4w Förstärkare Fjärrkontroll Kablage FM/AM Radio#200220
  
  
• 12,1" TFT LCD Takskärm (rpm12rm)
  Fjärrkontroll - IR
  style="FONT-FAMILY: courierstyle="FONT-FAMILY: arial" 12,1" TFT LCD Takskärm style="FONT-FAMILY: courierstyle="FONT-FAMILY: arial" 12v style="FONT-FAMILY: courierstyle="FONT-FAMILY: arial" Fjärrkontroll style="FONT-FAMILY: courierstyle="FONT-FAMILY: arial" Kablage style="FONT-FAMILY: courierstyle="FONT-FAMILY: arial" 2st video-ingångar, anslut 2st tillbehör samtidigt style="FONT-FAMILY: courierstyle="FONT-FAMILY: arial" Kompatibel med t.ex DVD-spelare, TV-spel, Video, GPS-mottagare etc. <UL style...
  
  
• 8 Tums Takskärm (rp84rm)
  TFT LCD
  <UL style="FONT-FAMILY: arial 8" TFT LCD Takskärm Inbyygd klocka Sharp-panel OSD-meny 12v 2st video-ingångar, anslut 2st tillbehör samtidigt Kompatibel med t.ex DVD-spelare, TV-spel, Video, GPS-mottagare etc Inbyggd belysning Fjärrkontroll Kablage
  
  
• 7" TFT LCD Bildskärm (rp70cuni)
  Nackstöd / Fot
  7" 16:9 TFT LCD Bildskärm Fjärrkontroll Vacker blå belysning utav knapparna 120 graders betraktningsvinkel Inbyggnadsram OSD-display 2 video-ingångar, anslut 2 tillbehör samtidigt Kompatibel med t.ex dvd-spelare, tv-spel, video, gps-enheter,&nbsp; backkamera etc.&nbsp;
  
  
• Delphi 578cc Spridare 17113841 25324744 (17113741)
  Delphi 578cc 17113841 Spridare - Låg
  face=ArialDelphi 578cc 17113841 Spridare face=ArialDenna Deplhi spridare flödar 578cc vid 3 bars bränsletryck.&nbsp;Den har 6 hålsteknik och&nbsp;är&nbsp;lågohmig 2.0 ohm "peak n hold". Det är en "bosch standard" modell dvs den passar i dom flesta amerikanska och europeiska bilar. face=ArialLagervara, omgående leverans. face=Arial Delphi Part Number 17113841 (OE # 25324744) -1Static Flow Rate @ 43.5 PSI (300KPa) =&nbsp; 55.0 lb/hr / 6.9 gm/sec / 578 cc/minface=Arial -1Static Flow Rate @ 58.0 PSI (400KPa) =&nbsp; 63.5 lb/hr / 7.97 gm/sec / 667 c...
  
  
• Siemens Deka 599cc Spridare 3172 FI11467 (3172)
  Siemens Deka 599cc 3172 Spridare - Hög
  face=ArialSiemens Deka 599cc 3172 FI11467 Spridare face=ArialDenna&nbsp;Siemens Deka&nbsp;spridare flödar 599cc vid 3 bars bränsletryck.&nbsp;Den har Disc sprut teknik och&nbsp;är&nbsp;högohmig&nbsp;12 ohm "Saturated". Det är en "bosch standard" modell dvs den passar i de flesta amerikanska och europeiska bilar. face=ArialLagervara, omgående leverans. face=ArialSiemens Part # FI11467 (old P/N 3172 (same calibration as P/N 3102 but with a 12 ohm coil) -1All tests run with n-Heptane (0.6855g/mL) @ 20<SUPo</SUPC (+/-1<SUPo</SUPC), 3...
  
  
• Lucas 257cc Spridare 01D042B 621048 (D1810BA)
  Lucas 257cc 01D042B Spridare - Hög
  face=ArialLucas 257cc 01D042B 621048 Spridare face=ArialDenna&nbsp;Lucas spridare flödar 257cc vid 3 bars bränsletryck.&nbsp;Den har 6 hålsteknik och&nbsp;är&nbsp;högohmig&nbsp;12,2 ohm "Saturated". Det är en "bosch standard" modell dvs den passar i dom flesta amerikanska och europeiska bilar. face=ArialLagervara, omgående leverans. face=ArialPart Number 01D042B (Lucas New 621048) -1All tests run with n-Heptane @ 20oC (+/-1oC), 3.0 Bar (+/-0.01 Bar), 14VDC (+/-0.05VDC), saturated driver with RC cutoff. face=Arial-1Static Flow Rate: 23.1 lb/h...
  
  
• HKS Racing BOV Type-2 (hksrbovt2)
  HKS Racing Dumpventil Type-2
  This is the baddest BOV on the market today. It will easily hold 40psi, and can blow off enough air for a huge single turbo.
  
  
• HKS Intercooler Kit (hksmkivics)
  Type S
  The newest front mount from HKS, this is a steal of a deal. Includes the front mount (600x300x65mm) and a set of 3 70mm pipes. Please note it does not include the two pipes leading directly to your stock turbos, the stock pipes will work as well. This kit is rated to 550 RWHP.
  
  
• HKS Intercooler Kit (hksmkivr)
  Type R
  HKS intercooler systems are designed to rapidly &amp; consistently draw heat away from the intake charge by passing it through what is best described as a ´radiator´ for air. This produces power gains throughout the powerband &amp; reduces thermal stress in turbocharged engines. All systems utilize tube and fin intercooler cores, as well as mandrel bent intake pipes, silicone joint hoses &amp; all necessary installation brackets &amp; hardware. Pictured is the Supra TT FMIC kit as an example of what comes with this kit.
  
  
• Greddy Intercooler Kit (gredmkiv3)
  3 Raders (3 Row)
  addition of a GReddy intercooler is an excellent way of safely increasing horsepower. By reducing the engine´s inlet temperatures, a denser air charge will enter the engine; this will make more power at the same boost level. Greddy´s vehicle specific kits include all the necessary mounts, piping and hoses required to install the kit. All kits are designed to give maximum cooling capacity while allowing for minimal pressure drops. This is achieved by properly sizing the core and tuning the internal core with either a V-spec. core or with a different inner fin pattern in the R-spec core. All cor...
  
  
• HKS IC Hardpipe Upgrade Kit (hkspukmkiv)
  För Type R IC som används tillsammans med original turbos
  HKS Intercooler Pipe upgrades are designed to reduce pressure loss through OEM intercooler systems. The systems were designed to offer significant gains at a fraction of the cost of full I/C systems. All HKS I/C pipe upgrades are 50-state street legal for factory turbocharged vehicles.
  
  
• HKS IC Hardpipe Upgrade Kit (hksmkivicuk)
  HKS Intercooler Pipe upgrades are designed to reduce pressure loss through OEM intercooler systems. The systems were designed to offer significant gains at a fraction of the cost of full I/C systems. All HKS I/C pipe upgrades are 50-state street legal for factory turbocharged vehicles.
  
  
• Stillway Sequential Shifters - Sequential Shifter Kit (mkivstillwaykit)
  This Japanese Stillway sequential shifter adaptor kit is for your factory Getrag 6 speed transmission. This modification to the factory shifter allows you to lock out the traditional shifting scheme and go sequential. Inteded mainly for drag racers you can then do the 1-2, 2-3, 3-4 shifts by simply pulling up or down on the shifter!!! This means NO more missed shifts, ever!!! Shifting is available only in upshift mode, but with a simple flick of the switch you can return to the factory shifting pattern.This part does NOT require the transmission to be dropped and is installed very similar to a...
  
  
• Sound Performance Torque Converters (mkivtc1)
  Level 1 & 2
  <!--StartFragment --Level 1 - For up to 750hp, with a stall of 3800RPM. This is ideal for stock twin turbos and small single turbos. This convertor is a rebuilt and modified stock convertor with new bearings and a modified impeller and turbine. This convertor will be sold with an exchange of a stock convertor only. Level 2 - For larger horsepower levels (750hp-1500hp), with a higher stall of 4000RPM. Also includes a CNC machined turbine hub, sealed Torrington bearings, a furnace brazed impeller &amp; turbine, an anti-ballooning plate, reinforced turbine vanes, and heat treated precisi...
  
  
• Precision Industries Torque Converters (pitcmkiv)
  Dragon Series
  Toyota, Supra 93-98, 3,800 stall
  
  
• Greddy T-88 34D Turbokit (gredmkivt8834d)
  The T88 kit is a monstrous turbo kit that works incredibly well with the Toyota Supra (6 speed). The turbo begins to build boost at around 4,500 rpm, with a real kick at around 5,000rpm. This kit can be run without a fuel system as long as boost levels are kept below 1.3bar. With a fuel system, and FMIC, this kit can easily accomodate 725+ rwhp, and with cams over 800+ rwhp. Note 1: Picture is of MKIV SUpra T78 Kit
  
  
• HKS Coil Over Kit (hksmkivcok)
  Hiper Max II
  Hipermax Damper II coilover kits provide the ultimate in suspension tuning with 30-way dampening, threaded dual-chambered shock assemblies and perches for height adjustment, upper Pillowball mounts for improved steering response, and tempered springs.
  
  
• HKS Coil Over Kit (hksmkivcok2)
  HiperMax Drag
  HKS Hipermax DRAG coilover kits provide the ultimate in drag racing suspension tuning with 30-way dampening, threaded dual-chambered shock assemblies and perches for height adjustment. Hipermax DRAG units are set up specifically for straight line performance.
  
  
• Tein Coil Over Kit (teinmkivss)
  SuperStreet SS
  High performance and cost effective. Sport handling and driving comfort combined. Contents of damper kit Adjustable shock absorber x4 Main spring x4 Lower spring seat x4 Seat lock x4 Thrust washer x4 Bump rubber x4 Dust cover x4 Hook spanner x2 Instruction manual 16 level damping adjustment *Strut suspension comes with upper spring seat. TEIN has developed advanced technology to design the shell case and stroke to bring out the full potential of your vehicle. The features of the TEIN Super Street Damper were designed with greater performance to satisfy all your driving demands. This high per...
  
  
• Tein Coil Over Kit (teinmkivcokre)
  RE with Pillowball Upper Mounts
  Contents of damper kit Full length Adjustable shock absorber x4 Main spring x4 Lower spring Seat x4 Spring Seat lock x8 Bump rubber x4 Dust cover x4 Pillow ball upper mount x4 Hook spanner x2 Instruction manual Ride height is adjustable without chaging the preload of the spring,which is a special feature of the full-length adjustable system with threads on the lower bracket. For circuit racing,Type RA damper with an added full-length adjustment system. The damping force is adjustable up to 16 levels. Toyota, Supra 93-98, (Drop -1.2 Front, -0.7 Rear (Spring Rate 894 lbs/in Front, 559 lbs/in...
  
  
• Tein Coil Over Kit (teinmkivracok)
  RA with Pillowball Upper mounts
  The Tein RA system includes all four solid upper pillow ball mounts for the ultimately in handling. This kit was originally developed for use in the rally fields such as the World Rally Championship. There is no compromise in handling with this kit, it is for the hard-core road-racer. Note: RA &amp; RE are the same except RE have the added "Full Length Adjustment System" Use of ultra light and strong aluminum - A7050 which is also used in airplanes. A I.D.45 piston which is maximum for marketed cars´ shock absorber. Toyota, Supra 93-98, (93-98) Drop -1.4 Front, -0.6 Rear, Ran...
  
  
• Tein Coil Over Kit (teinmkivflexcok)
  FLEX with Pillowball Upper Mounts
  Contents of damper kit Adjustable shock absorber x4 Main spring x4 Lower spring Seat x4 Spring Seat lock x12 Bump rubber x4 Dust cover x4 Hook spanner x2 Instruction manual *Rr-H.A.S. = Height Adjustment System *Strut suspension comes with upper spring seat. Adjustable length and twin tube shell case. Special setting for sporty driving and ride confort. You can set your vehicle to meet all situations! Toyota, Supra 93-98, (Drop -0.9 Front, -0.4 Rear (Spring Rate 783 lbsin Front 448 lbsin Rear)) EDFC #4
  
  
• Tein Coil Over Kit (teinmkivcscok)
  CS with Rubber Upper Mount
  (KIT Includes) Shockabsorber/4 Spring/4 Lower Spring Seat/4 Spring Seat Lock/4 Thrust Washer/4 Bump Rubber/4 Dust Boot/4 Rubber Upper Mount/4 Height Gauge Install Manual Damping Force Adjust Tool Hook Spaner/2 Comfort-Providing Shock Absorber *Upgraded shell case by 130% and lightening 20 compared to the genuine model *Compleated spring and upper mount with absorber for reduced instllation time *For you seeking higher quality of "comfort". *Adopted mono-tube type to realize Heightening road holding *Designed a hardness rubber upper mount for noise proofing *Created driving pleasure...
  
  
• Tein Coil Over Kit (teinmkivbasic)
  Basic
  Contents of damper kit Height Adjustable shock absorber x4 Main spring x4 Lower spring seat x4 Seat lock x4 Thrust washer x4 Bump rubber x4 Dust cover x4 Hook spanner x2 Instruction manual Note: Attention!! Incompatible with the EDFC. * H.A.S. (Height Adjustment System) Toyota, Supra 93-98, (Drop -1.1" Front, -.7 Rear, 783 lbs/in Front 447 Lbs/in Rear)
  
  
• Tanabe Coil Over Kit (tanabemkivss)
  Sustec Pro S-S Type II
  The benefits of the S-S at an exceptional value 4-way front adjustment, and 8-way rear adjustment allows drivers to fine tune dampening and rebound based on track conditions and driver preference. For those who desire a coil over kit that is affordable, well balanced, and ready for use on the track, we are now offering the SS Type 2 without helper springs. Extreme Short Stroke / Short Case Super Low Down drop of 60 100mm (2 3/8 4in) without compromising stroke or ride comfort. Spring Seat &amp; Lock Nut Superior forged alluminum Spring Seat and Lock Nut ensures longevity and strengt...
  
  
• Tanabe Coil Over Kit (tanabemkivcokss)
  Sustec Pro S-S
  Pro suspension for the Street, tuning for the Track Delivering broad performance for the track to the streets, Sustec Pro S-S features 4-way front adjustment and 8-way rear adjustment. S-S allows drivers to fine tune height, dampening and rebound based on track conditions and driver preference. Helper Springs eliminate pre-load of the main spring, which maximizes ride comfort and rebound stability. Extreme Short Stroke / Short Case Super Low Down drop of 60 100mm (2 3/8 4in) without compromising stroke or ride comfort. Spring Seat &amp; Lock Nut Superior forged alluminum Spring Sea...
  
  

Starweb.se - E-butik och e-handel
E-butik och e-handel för små och medelstora företag. Vi hyr ut e-butik, e-handel, webbutik eller ebutik inklusive support och webbhotell till en låg månadskostnad!